Removing The Heat Sink; Cleaning The Heat Sink Underside And The Processor Surface - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

11.2.5 Removing the heat sink

Figure 183: Removing the heat sink
Ê Loosen the four screws of the heat sink in a crossover pattern according to
the numbering.
Ê Loosen the heat sink by turning it back and forth and then lift it out.
11.2.6 Cleaning the heat sink underside and the
processor surface
Ê Remove the residual thermal paste from the underside of the heat sink and
the surface of the processor.
Ê Clean the underside of the heat sink and the surface of the processor using
a lint-free cloth.
RX100 S7
Upgrade and Maintenance Manual
Processor
283