Installing The Riser Module 1; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Processor

11.2.12 Installing the riser module 1

Figure 193: Installing the riser module 1
Ê Insert the riser card into the system board slot.

11.2.13 Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Updating the system board BIOS and iRMC" on page 81
4. "Enabling SVOM boot watchdog functionality" on page 89
5. "Switching on the server" on page 72
6. "Enabling BitLocker functionality" on page 94
7. "Closing the rack door" on page 73
292 Upgrade and Maintenance Manual
RX100 S7