Completing The Maintenance Task; Updating The System Board Bios And Irmc - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

5.2

Completing the maintenance task

5.2.1

Updating the system board BIOS and iRMC

After replacing the system board, it is essential to upgrade the BIOS to the latest
version.
The latest BIOS and iRMC versions are available from the Fujitsu support
internet pages at:
http://ts.fujitsu.com/support/
http://jp.fujitsu.com/platform/server/primergy/downloads/
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
BIOS recovery procedure
I
For the Japanese market, follow the instructions provided separately.
Ê Prepare a USB stick with the following files:
– Update tool
– Startup.nsh (which will execute the update tool)
– BIOS image file for update (16 MB with header information)
Ê Shut down the server as described in section
page 59 and disconnect it from the mains.
Ê Remove the top cover as described in section
page 64.
Ê Enter BIOS recovery mode using the onboard jumpers.
I
For detailed information on jumper settings, refer to section
on page 459
Ê Close the top cover as described in section
Ê Connect the USB stick to the USB connector.
Ê Connect the server to the mains.
RX100 S7
(EMEA market)
or the "System Board D3034 Technical Manual".
Upgrade and Maintenance Manual
Basic software procedures
(Japanese market)
"Shutting down the server" on
"Opening the server" on
"Closing the server" on page
"Jumper"
66.
81