Led Indicator Description - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Appendix
The separate management LAN connector is used as a management interface
(iRMC S3) and is prepared for operation with the Remote Management.
Optionally the shared LAN connector can also be used for iRMC S3 server
management.
Each LAN connector has two LEDs which display the speed of the connection
and its status:
Figure 343: LAN LEDs
LED Indicator
1 LAN speed
2 LAN
link/transfer
452
Description
Steady yellow signal in the event of a LAN transfer
rate of 1 Gbit/s
Steady green signal in the event of a LAN transfer
rate of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Upgrade and Maintenance Manual
RX100 S7