Removing The Riser Module 1; Removing The Slot Cover - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4.1.3

Removing the riser module 1

Figure 111: Removing the riser module 1
Ê Carefully pull out the riser module 1 upward.
9.4.1.4

Removing the slot cover

Figure 112: Pulling out the slot cover - slot 3
Ê Pull out the slot cover frontward (1) and remove it sideward (2).
200 Upgrade and Maintenance Manual
RX100 S7