Installing A Second Psu; Removing The Dummy Cover - Fujitsu PRIMERGY TX1330 M4 Operating Manual

6.4

Installing a second PSU

6.4.1

Removing the dummy cover

Figure 30: Removing the dummy cover
Ê Press in on both release latches (1) and remove the PSU dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be installed in
the bay again to comply with applicable EMC regulations and satisfy
cooling requirements.
TX1330 M4
Operating Manual
Operation
89