Installing The New Tfm; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 135: Removing the TFM
Ê Remove the three screws (1).
Ê Remove the TFM (2).
9.4.7.4

Installing the new TFM

Ê Install the new TFM as described in section
page 247.
Ê Connect the FBU adapater cable to the TFM as described in section
"Connecting the FBU adapter cable to the TFM" on page
Ê Install the expansion card as described in section
riser modules" on page
9.4.7.5

Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73
226
199.
Upgrade and Maintenance Manual
"Preparing the FBU" on
249.
"Expansion cards and
RX100 S7