Cables
16.2.2 Preliminary steps
Ê Perform the following procedures:
1.
"Opening the rack door" on page 59
2.
"Locating the defective server" on page 55
3.
"Shutting down the server" on page 59
4.
"Extending/removing the server from the rack" on page 60
5.
"Opening the server" on page 64
16.2.3 Removing the defective front panel cable
Figure 266: Disconnecting the front panel cable
Ê Disconnect the front panel cable from the front panel module.
390
Upgrade and Maintenance Manual
RX100 S7