Installing The Dummy Cover (If Applicable); Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

6.3.3.12 Installing the dummy cover (if applicable)

Figure 64: Installing the dummy cover
Ê Push the dummy cover into the right bay until it clicks into place.
Ensure that the marking "TOP" is right and the upper rear cant of the dummy
cover fits under the PSU cage.

6.3.3.13 Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Enabling BitLocker functionality" on page 94
5. "Closing the rack door" on page 73
RX100 S7
Upgrade and Maintenance Manual
Power supply
141