Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual page 34

Before you start
Replacing a defective component
The global error indicators on the front and rear sides of the server report
defective hardware components that need to be replaced. For further
information on the controls and indicators of your server, refer to the
"PRIMERGY RX100 S7 Server Operating Manual" and section
and indicators" on page
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate CSS" button enables the indicator next to the
defective component even if the server has been switched off and disconnected
from the mains. For further information, please refer to sections
diagnostics information" on page 55
If the defective component is a customer replaceable unit included in the CSS
concept (Customer Self Service, only available for EMEA market), the CSS
indicators on the front and rear side of the server will light up.
For further information, refer to the "ServerView Suite Local Service Concept
(LSC)" manual available from the ServerView Suite DVD 2 supplied with your
PRIMERGY server or online at
http://jp.fujitsu.com/platform/server/primergy/manual/
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.
34
447.
and
http://manuals.ts.fujitsu.com
Upgrade and Maintenance Manual
"Front panel" on page
(EMEA market) or
(Japanese market).
"Connectors
"Using
453.
RX100 S7