Required Tools; Preliminary Steps; Removing The Riser Module 1 - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

15.3.1.1 Required tools

Preliminary and concluding steps: tool-less
●
Installing the TPM:
●
– Bit screw driver
– TPM bit insert (*)
(*) For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)

15.3.1.2 Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling BitLocker functionality" on page 75
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64

15.3.1.3 Removing the riser module 1

Figure 248: Removing the riser module 1
Ê Carefully pull out the riser module 1 upward.
RX100 S7
Upgrade and Maintenance Manual
System board and components
363