7.2
3.5-inch HDD subsystem
7.2.1
Equipping the 3.5-inch HDD bays
Figure 75: Equipping the 3.5-inch HDD bays
– If only one HDD module is installed, the HDD module will be installed in the
left bay (seen from the front) and a dummy module must be installed in the
right bay.
– Installing different capacities, install the biggest capacity first.
– Installing different rotating speed, install the fastest rotating speed first.
SAS connectivity
Controller
SAS controller
in slot 1
HDD naming scheme
RAID
Bay
Manager
#
1
[0]
Table 6: HDD naming scheme
RX100 S7
Channel
1
3.5-inch HDDs
log.
Channel
Drive #
1
0
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Connection
Drive 1, 2
RAID
Bay
Manager
#
2
[1]
log.
Channel
Drive #
2
0
159