Checking The Power Supply Modules; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Power supply
Ê Lay the power cord in the cable tie.
Ê Connect the power cord to the power supply module.
Ê Close the cable tie.
Ê Connect the power cord to the mains.
6.3.1.7

Checking the power supply modules

Ê Check whether the power supply modules work properly.
A power supply module works properly when the indicator (1) in
lights green. For more information see section
on page 447.
Figure 44: Indicator on the power supply module
6.3.1.8

Concluding steps

Ê Perform the following procedures:
1. "Closing the rack door" on page 73
124 Upgrade and Maintenance Manual
"Connectors and indicators"
figure 44
RX100 S7