Removing The Defective Expansion Card; Installing The New Expansion Card; Installing The Riser Module 1 - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

9.4.5.4

Removing the defective expansion card

Figure 132: Removing the expansion card - slot 3
Ê Pull out the expansion card from the riser card slot.
Ê If the slot bracket on the defective expansion card is to be reused, remove it
from the board as described in section
brackets" on page
9.4.5.5

Installing the new expansion card

Ê Install the expansion card as described in section
card" on page
9.4.5.6

Installing the riser module 1

Ê Install the riser module 1 as described in section
1" on page 202.
RX100 S7
183.
201.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing expansion card slot
"Installing the expansion
"Installing the riser module
219