Connecting The Power Cables; Installing The Power Supply Module - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Power supply
6.2.8

Connecting the power cables

Figure 30: Connecting the power cables
Ê Connect the two power cables to the system board connectors "PWR2" and
"PWR1" and the power distribution board.
6.2.9

Installing the power supply module

I
The power supply module must be installed in the first bay (left bay seen
from rear side). The dummy cover must be installed in the second bay.
114 Upgrade and Maintenance Manual
RX100 S7