Hard disk drives / solid state drives
7.1.4.2
Preliminary steps
Ê Perform the following procedures:
1.
"Opening the rack door" on page 59
2.
"Locating the defective server" on page 55
3.
"Locating the defective component" on page 58
7.1.4.3
Removing the defective 2.5-inch HDD/SSD module
Ê Remove the HDD/SSD module as described in section
inch HDD/SSD module" on page
7.1.4.4
Installing the new 2.5-inch HDD/SSD module
Ê Install the HDD/SSD module as described in section
HDD/SSD module" on page
7.1.4.5
Concluding steps
Ê Perform the following procedures:
1.
"Closing the rack door" on page 73
2.
"Performing a RAID array rebuild" on page 95
154
151.
148.
Upgrade and Maintenance Manual
"Removing the 2.5-
"Installing the 2.5-inch
RX100 S7