Replacing The Processor; Required Tools - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Processor
11.2

Replacing the processor

Field Replaceable Units (FRU)
Additional task duration for BIOS Flash: 5 minutes
Average task duration: 15 minutes
V
CAUTION!
Processors are modules which are extremely sensitive to electrostatic
discharges and therefore must always be handled with care. After a
processor has been removed from its protective sleeve or from its
socket, place it with its smooth side down on a non-conducting, antistatic
surface. Never push a processor over a surface.
V
CAUTION!
Follow the safety instructions in chapter
page 43.

11.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Main steps:
●
– Phillips PH2 / (+) No. 2 screw driver
– lint-free cloth
280 Upgrade and Maintenance Manual
"Important information" on
RX100 S7