Installing A Second Psu; Removing The Dummy Cover - Fujitsu PRIMERGY RX2540 M5 Operating Manual

Operation
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
I
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see section
overview" on page
6.3

Installing a second PSU

6.3.1

Removing the dummy cover

Figure 33: Removing the PSU dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be installed in
the bay again to comply with applicable EMC regulations and satisfy
cooling requirements.
88
13.
Operating Manual
"Documentation
RX2540 M5