9.4.8.6
Installing the new riser card
Figure 137: Installing the riser card - slot 3
Ê Insert the riser card (1).
Ê Fasten the riser card with two screws (2).
9.4.8.7
Installing the expansion card
Ê Install the expansion card as described in section
card" on page
9.4.8.8
Installing the riser module 1
Ê Install the riser module 1 as described in section
1" on page
202.
9.4.8.9
Concluding steps
Ê Perform the following procedures:
1.
"Closing the server" on page 66
2.
"Installing the server in the rack" on page 68
3.
"Switching on the server" on page 72
4.
"Closing the rack door" on page 73
RX100 S7
201.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the expansion
"Installing the riser module
229