Removing An Expansion Card In Riser Module 2; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4.4

Removing an expansion card in riser module 2

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
V
CAUTION!
Follow the safety instructions in chapter
page 43.
9.4.4.1

Required tools

Preliminary and concluding steps: tool-less
●
Main steps:
●
– slot 2: tool-less
– slot 1: Phillips PH2 / (+) No. 2 screw driver
9.4.4.2

Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling BitLocker functionality" on page 75
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
212 Upgrade and Maintenance Manual
"Important information" on
RX100 S7