Installing The New Fbu - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 174: Removing the FBU from the FBU holder
Ê At a slight angle, slide the FBU from under the retaining brackets of the FBU
holder and remove it.
9.5.6.5

Installing the new FBU

Ê Install the new FBU into the FBU holder as described in section
the FBU" on page
Ê Install the FBU holder into the chassis as described in section
FBU holder into the chassis" on page
Ê Connect the FBU adapter cable to the TFM as described in section
"Connecting the FBU adapter cable to the TFM" on page
266
247.
Upgrade and Maintenance Manual
249.
"Preparing
"Installing the
249.
RX100 S7