Display:connect - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

33
Obsolete and Discontinued Commands

:DISPlay:CONNect

Command Syntax
:DISPlay:CONNect <connect>
<connect> ::= {{ 1 | ON} | {0 | OFF}}
The :DISPlay:CONNect command turns vectors on and off. When vectors
are turned on, the oscilloscope displays lines connecting sampled data
points. When vectors are turned off, only the sampled data is displayed.
The :DISPlay:CONNEct command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :DISPlay:VECTors command (see
Query Syntax
:DISPlay:CONNect?
The :DISPlay:CONNect? query returns the current state of the vectors
setting.
Return Format
<connect><NL>
<connect> ::= {1 | 0}
See Also •
714
(see page 790)
":DISPlay:VECTors" on page 262
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
page 262) instead.