Enable Bgp Export - Extreme Networks ExtremeWare Command Reference Manual

enable bgp export

enable bgp export [[direct | ospf | ospf-extern1 | ospf-extern2 |
ospf-inter | ospf-intra | isis | isis-level-1 | isis-level-1-external |
isis-level-2 | isis-level-2-external | rip | static | vip] {<route map>}
Description
Enables BGP to export routes from other protocols to BGP peers.
Syntax Description
direct
ospf
ospf-extern1
ospf-extern2
ospf-inter
ospf-intra
isis
isis-level-1
isis-level-1-external
isis-level-2
isis-level-2-external
rip
static
vip
route map
Default
Disabled.
Usage Guidelines
The exporting of routes between any two routing protocols is a discreet configuration function. For
example, you must configure the switch to export routes from OSPF to BGP and, if desired, you must
configure the switch to export routes from BGP to OSPF. You must first configure both protocols and
then verify the independent operation of each. Then, you can configure the routes to export from OSPF
to BGP, and the routes to export from BGP to OSPF. Similarly for BGP and ISIS, or BGP and RIP.
You can use route maps to associate BGP attributes including Community, NextHop, MED, Origin, and
Local Preference with the routes. Route maps can also be used to filter out exported routes.
Using the
export
config bgp add network
only if the route is present in the routing table. The
individual route from the routing table to BGP. If you use both commands to redistribute routes, the
routes redistributed using the
command.
export
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies direct routing.
Specifies OSPF routing.
Specifies OSPF-extern1 routing.
Specifies OSPF-extern2 routing.
Specifies OSPF-inter routing.
Specifies OSPF-intra routing.
Specfies IS-IS routing.
Specifies IS-IS level 1 routing
Specifies IS-IS level 1 external routing.
Specifies IS-IS level 2 routing
Specifies IS-IS level 2 external routing
Specifies RIP routing.
Specifies static routing.
Specifies VIP routing.
Specifies a route map.
command to redistribute routes complements the redistribution of routes using the
command. The
command take precedence over routes redistributed using the
network
config bgp add network
enable bgp export
enable bgp export
command adds the route to BGP
command redistributes an
1111