unconfig ospf
unconfig ospf {vlan <vlan name> | area <area identifier>}
Description
Resets one or all OSPF interfaces to the default settings.
Syntax Description
vlan name
area identifier
Default
N/A.
Usage Guidelines
None.
Example
The following command resets the OSPF interfaces to the default settings on the VLAN accounting:
unconfig ospf accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a VLAN name.
Specifies an OSPF area.
unconfig ospf
1029