Config Flowstats Source Ipaddress - Extreme Networks ExtremeWare Command Reference Manual

config flowstats source ipaddress

config flowstats source ipaddress <ip address>
Description
Configures the IP address that is to be used as the source IP address for NetFlow datagrams to be
exported.
Syntax Description
ip address
Default
Normal.
Usage Guidelines
No NetFlow datagrams will be exported until the source
devices may use the source IP address of received NetFlow datagrams to identify the switch that sent
the information. It is recommended that the configured
has loopback mode enabled.
Example
The following command example specifies that the IP address
source IP address for exported NetFlow datagrams:
config flowstats source ipaddress 192.168.100.1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20 for the PoS module only.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the source IP address to be used as the source for NetFlow
datagrams to be exported.
ip address
config flowstats source ipaddress
is configured. Flow-collector
ip address
be associated with a VLAN that
is to be used as the
192.168.100.1
1275