Config Ipxsap Vlan Import-Filter - Extreme Networks ExtremeWare Command Reference Manual

config ipxsap vlan import-filter

config ipxsap vlan [<vlan name> | all] import-filter [none |
access_profile]
Description
Assigns an import route filter to an ingress VLAN.
Syntax Description
vlan name
all
none
access_profile
Default
N/A.
Usage Guidelines
Only the network ID matching the import filter will be added to the IPX route table.
Example
The following command assigns an import route filter to ingress VLAN
config ipxsap vlan accounting import-filter none
History
This command was introduced in ExtremeWare 4.0;
Platform Availability
This command is available on the all "i" series systems.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
Specifies no route filters.
Specifies an access profile name.
access-profile
config ipxsap vlan import-filter
:
accounting
s modified in version 6.1.5b20.
1199