IPX Commands
config ipxmaxhops
config ipxmaxhops <number>
Description
Configures the IPX maximum hop count when forwarding IPX packets.
Syntax Description
number
Specifies a hop count number.
Default
The default setting is 16.
Usage Guidelines
Change the default number only if NetWare Link Services Protocol (NLSP) is running in the IPX
network.
Example
The following command configures a maximum IPX hop count of
:
24
config ipxmaxhops 24
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
1184
ExtremeWare Software 7.0.0 Command Reference Guide