Config Ipxsap Vlan Delay - Extreme Networks ExtremeWare Command Reference Manual

config ipxsap vlan delay

config ipxsap vlan [<vlan name> | all] delay <msec>
Description
Configures the time between each SAP packet within an update interval.
Syntax Description
vlan name
all
msec
Default
The default setting is 55 milliseconds.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is
enabled by default when the IPX VLAN is configured.
Example
The following command sets the time between each SAP packet to
:
accounting
config ipxsap vlan accounting delay 40
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
Specifies a delay in milliseconds.
config ipxsap vlan delay
milliseconds for VLAN
40
1197