Enable Bgp Peer-Group - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

enable bgp peer-group

enable bgp peer-group <peer group> {soft-in-reset}
{remove-private-AS-numbers}
Description
Enables a peer group and all the neighbors of a peer group.
Syntax Description
peer group
soft-in-reset
remove-private-AS-numbers
Default
N/A.
Usage Guidelines
You can use BGP peer groups to group together up to 200 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
• remote AS
• source-interface
• out-nlri-filter
• out-aspath-filter
• out-route-map
• send-community
• next-hop-self
Example
The following command enables the BGP peer group external and all its neighbors:
enable bgp peer-group external
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
1116
Specifies a peer group.
Specifies the soft recognition feature.
Specifies to remove private AS numbers.
ExtremeWare Software 7.0.0 Command Reference Guide