IP Multicast Commands
config pim vlan trusted-gateway
config pim vlan [<vlan name> | all] trusted-gateway [<access profile> |
none]
Description
Configures a trusted neighbor policy.
Syntax Description
vlan name
all
access profile
none
Default
No access profile, so all gateways are trusted.
Usage Guidelines
Because PIM leverages the unicast routing capability that is already present in the switch, the access
policy capabilities are, by nature, different. When the PIM protocol is used for routing IP multicast
traffic, the switch can be configured to use an access profile to determine trusted PIM router neighbors
for the VLAN on the switch running PIM.
Example
The following command configures a trusted neighbor policy on the VLAN backbone:
config pim vlan backbone trusted-gateway nointernet
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
1154
Specifies a VLAN name.
Specifies all VLANs.
Specifies an access profile name.
Specifies no access profile, so all gateways are trusted.
ExtremeWare Software 7.0.0 Command Reference Guide