Config Bgp Neighbor No-Dampening - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

config bgp neighbor no-dampening

config bgp neighbor [<ip address> | all] no-dampening
Description
Configures no route flap dampening over BGP peer sessions (disables route flap dampening).
Syntax Description
ip address
all
Default
This feature is disabled by default.
Usage Guidelines
Use the following command to enable route flap dampening for BGP neighbors:
config bgp neighbor [<ip address> | all] dampening
<suppress> <max-suppress> }} | {route-map <route map>}}
Example
The following command disables route flap dampening to the BGP neighbor at 192.168.1.22:
config bgp neighbor 192.168.1.22 no-dampening
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all "i" series platforms.
1058
Specifies an IP address.
Specifies all neighbors.
{{<half-life> {<reuse>
ExtremeWare Software 7.0.0 Command Reference Guide