PoS Commands
delete aps
delete aps <group#>
Description
Deletes the specified APS group.
Syntax Description
group#
Specifies the APS group# to which the command applies.
Default
N/A.
Usage Guidelines
You specify the
parameter, which is an integer in the range [1-65535]. The
identifies the
group#
group#
APS group to delete.
Example
The following command example deletes APS group 1001:
delete aps 1001
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
1302
ExtremeWare Software 7.0.0 Command Reference Guide