Disable Igmp Snooping - Extreme Networks ExtremeWare Command Reference Manual

disable igmp snooping

disable igmp snooping {forward-mcrouter-only | vlan <vlan name>}
Description
Disables IGMP snooping.
Syntax Description
forward-mcrouter-only
vlan name
Default
Enabled.
Usage Guidelines
If a VLAN is specified, IGMP snooping is disabled only on that VLAN, otherwise IGMP snooping is
disabled on all VLANs.
If the switch is in the
forward-mcrouter-only
not in the forward-mcrouter-mode, the command
has no effect.
To change the snooping mode you must disable IP multicast forwarding. Use the command:
disable ipmcforwarding
Example
The following command disables IGMP snooping on the VLAN accounting:
disable igmp snooping accounting
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies that the switch forwards all multicast traffic to the multicast router
only.
Specifies a VLAN.
forward-mcrouter-only
changes the mode so that all multicast traffic is forwarded to any IP router. If
mode, then the command
disable igmp snooping forward-mcrouter-only
disable igmp snooping
disable igmp snooping
1159