Unconfig Ppp Ports - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

PoS Commands

unconfig ppp ports

unconfig ppp ports <portlist>

Resets the PPP configuration parameters for the specified ports to their default values.

Syntax Description

Specifies the port number(s).

Usage Guidelines

By default, BCP is enabled on all PoS ports. (However, ports 2 and 4 of OC-3c modules are not

members of any VLANs by default; all other ports are members of the default VLAN by default.)

The following command resets the PPP configuration parameters for port 1, slot 8 of a BlackDiamond

switch to the default values:

unconfig ppp ports 8:1

This command was first available in an ExtremeWare IP Technology Services Release based on

Platform Availability

This command is available on the BlackDiamond switch. A similar command is available on the Alpine

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0