Run Ipmcfdb-Check - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

run ipmcfdb-check

run ipmcfdb-check [index <bucket> <entry> | <IP multicast group> <source IP
address> vlan <vlan name>] {extended} {detail}
Description
Checks IP multicast FDB entries for consistency.
Syntax Description
bucket
entry
IP multicast group
source IP address
vlan name
extended
detail
Default
N/A.
Usage Guidelines
The FDB error checking function logs the error count into the system log. Use the
more detailed debug information.
Example
The following command runs a consistency check on the FDB entries for the IP multicast group
168.192.2.4:
run ipmcfdb-check 168.192.2.4 195.1.1.100 vlan lab1 extended detail
History
This command was first available in ExtremeWare 6.1.9.
Platform Availability
This command is available on all "i" series platforms.
1172
Specifies the bucket portion of the FDB hash index.
Specifies the entry portion of the FDB hash index.
Specifies a multicast group. FDB entries with this group will be checked.
Specifies an IP source address.
Specifies a VLAN name. FDB entries for this VLAN with the specified
multicast group number will be checked.
Enables OTP index checking in the MAC entry and VPST of the egress port.
Specifies that more detailed debug information should be logged.
option to log
detail
ExtremeWare Software 7.0.0 Command Reference Guide