Config Red Min-Threshold Ports - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

PoS Commands

config red min-threshold ports

config red min-threshold <percent> ports <portlist>

Configures the minimum queue length threshold for RED operation on the specified PoS ports.

Syntax Description

min-threshold

Usage Guidelines

When this threshold is exceeded, the RED algorithm is activated. Currently, the command is only

applicable to PoS ports. The

PoS-port basis. The min-threshold is specified as a percentage, where the

in the range [1..100]. For PoS ports, the minimum threshold is a percentage of 1000 packet buffers, and

the maximum threshold is set to minimum ((3 * minimum threshold buffers), maximum available

buffers). The settings for both the minimum and maximum thresholds, in terms of number of buffers,

are displayed by the

show ports info detail

The following command configures minimum queue length threshold of 50 for port 1 of the PoS

module installed in slot 8 of the BlackDiamond switch:

config red min-threshold 50 port 8:1

This command was first available in an ExtremeWare IP Technology Services Release based on

Platform Availability

This command is available on the BlackDiamond switch only.

Specifies the percentage for the minimum queue length threshold for RED

Specifies the port number(s).

is 10% for PoS ports.

keyword allows the threshold parameter to be configured on a

parameter is an integer

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0