IP Multicast Commands
config pim cbsr
config pim cbsr [vlan <vlan name> {<priority [0-254]> | none]
Description
Configures a candidate bootstrap router for PIM sparse-mode operation.
Syntax Description
vlan name
priority
none
Default
The default setting is 0 and indicates the lowest priority.
Usage Guidelines
The VLAN specified for CBSR must have IP forwarding enabled for PIM sparse mode.
Example
The following command configures a candidate bootstrap router on the VLAN accounting:
config pim cbsr vlan accounting 30
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1144
Specifies a VLAN name.
Specifies a priority setting. The range is 0 - 254.
Specifies to delete a CBSR.
ExtremeWare Software 7.0.0 Command Reference Guide