Extreme Networks ExtremeWare Command Reference Manual page 1264

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

PoS Commands

This command is currently only applicable to SONET ports. If the

no-congestion

keywords are omitted, the mapping is applied to the egress tables for both states. If the

keywords are omitted, the mapping is assumed to apply to the egress direction, and a

symmetrical mapping (with the

reversed) is automatically

input_codepoint

output_codepoint

configured in the

The following command example configures the congested-state mappings for DSCPs 10 (AF11):

config diffserv dscp-mapping 10/12 egress congestion

This command was first available in an ExtremeWare IP Technology Services Release based on

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0