Show Ipxroute - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands

show ipxroute

show ipxroute {vlan <vlan name> | xnetid <netid> | origin [static | rip |
local]}
Description
Displays the IPX routes in the route table.
Syntax Description
vlan name
netid
static
rip
local
Default
N/A.
Usage Guidelines
Route information is entered into the IPX route table in one of the following two ways:
• Dynamically, by way of RIP
• Statically, using the
config ipxroute add
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN. To remove the advertisement
of an IPX VLAN, use the
Example
The following command displays the IPX routes in the route table for VLAN
show ipxroute vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
1218
Specifies a VLAN name.
Specifies an IPX network number.
Specifies a statically defined route.
Specifies a RIP learned route.
Specifies a local interface.
command
config ipxrip delete
command.
:
accounting
ExtremeWare Software 7.0.0 Command Reference Guide