Enable Bgp Neighbor Soft-In-Reset - Extreme Networks ExtremeWare Command Reference Manual

enable bgp neighbor soft-in-reset

enable bgp neighbor [all | <ip address>] soft-in-reset
Description
Enables the soft input reset feature.
Syntax Description
all
ip address
Default
N/A.
Usage Guidelines
Disabling the soft input reset feature can potentially limit the amount of system memory consumed by
the RIB-in.
Example
The following command enables the soft recognition feature:
enable bgp neighbor 192.168.1.17 soft-in-reset
History
This command was available in ExtremeWare 6.2.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies all neighbors.
Specifies an IP address.
enable bgp neighbor soft-in-reset
1115