Config Vlan Add Multilink - Extreme Networks ExtremeWare Command Reference Manual

config vlan add multilink

config vlan <vlan name> add multilink <groupname>
Description
Adds an MLPPP multilink group to a VLAN
Syntax Description
vlan
groupname
Default
N/A.
Usage Guidelines
Add an MLPPP group to a VLAN to transport traffic across the link. A multilink group configured for
BCP encapsulation can transport more than one VLAN's traffic (see "config ppp user" on page 1340 for
details).
Example
The following command adds the multilink group marmots to the VLAN corporate:
config corporate add ml_remote
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare Software 7.0.0 Command Reference Guide
.
Specifies a previously created VLAN
Specifies a previously created multilink group
config vlan add multilink
1341