Disable Multilink - Extreme Networks ExtremeWare Command Reference Manual

disable multilink

disable multilink
disable multilink <groupname>
Description
.
Disables an MLPPP multilink group
Syntax Description
groupname Specifies the multilink group name
Default
N/A.
Usage Guidelines
Use this command to disable a multilink group. The multilink group will stop transporting traffic across
the link.
Example
The following command disables the multilink group ml_remote:
disable multilink ml_remote
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare Software 7.0.0 Command Reference Guide 1347