Config Bgp Neighbor Source-Interface - Extreme Networks ExtremeWare Command Reference Manual

config bgp neighbor source-interface

config bgp neighbor [<ip address> | all] source-interface [any | vlan <vlan
name>]
Description
Changes the BGP source interface for TCP connections.
Syntax Description
ip address
all
any
vlan name
Default
Any.
Usage Guidelines
None.
Example
The following command changes the BGP source interface on the VLAN accounting:
config bgp neighbor 192.168.1.5 source-interface vlan accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an IP address.
Specifies all neighbors.
Specifies any source interface.
Specifies a VLAN name as a souce interface for TCP.
config bgp neighbor source-interface
1067