Show Sonet - Extreme Networks ExtremeWare Command Reference Manual

PoS Commands

show sonet

show sonet {<portlist>} {detail}
Description
Displays SONET port status.
Syntax Description
portlist
detail
Default
By default, the command shows summarized status for the port(s).
Usage Guidelines
You can use the
portlist
for. You can also omit the
status information can be obtained for the port(s) by specifying the detail parameter. Summary status
includes the following information for each port:
• Values of all port configuration parameters
• State of the port
• Identification of all currently active events
Example
The following command displays the SONET port status:
show sonet
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
1314
Specifies the port number(s).
Displays more detailed status information for the ports.
parameter to specify which SONET port(s) you want to display the status
parameter to obtain status for all SONET ports. More detailed
portlist
ExtremeWare Software 7.0.0 Command Reference Guide