Config Pim Register-Checksum-To - Extreme Networks ExtremeWare Command Reference Manual

config pim register-checksum-to

config pim register-checksum-to [include-data | exclude-data]
Description
Configures the checksum computation to either include data (for compatibility with Cisco Systems
products) or to exclude data (for RFC-compliant operation), in the register message.
Syntax Description
include-data
exclude-data
Default
Include data
Usage Guidelines
None.
Example
The following command configures the checksum mode to include data for compatibility with Cisco
Systems products:
config pim register-checksum-to include-data
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies to include data.
Specifies to exclude data.
config pim register-checksum-to
1151