Config Ports E1 Receivergain - Extreme Networks ExtremeWare Command Reference Manual

T1, E1, and T3 WAN Commands

config ports e1 receivergain

config ports <portlist> e1 receivergain [-12 | -43] db
Description
Configures E1 receiver gain to improve link performance.
Syntax Description
portlist
db
Default
The default value is -12 db.
Usage Guidelines
The receiver gain for E1 links can be configured to improve performances of the link. Changing the
receiver gain can help to receive the E1 signal or to reduce crosstalk. Receiver gain is only configurable
for E1 links. For T1 links see "config multilink add" on page 1322 and for T3 links see "config ports t1
framing" on page 1331.
Example
The following command configures the receiver gain:
config ports 2:2 e1 receivergain -43 db
History
This command was first available in ExtremeWare v6.1.8w3.0.1b56 WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
1326
A list of ports.
Specifies the receiver gain in decibels. Only the values above are allowed.
ExtremeWare Software 7.0.0 Command Reference Guide