IPX Commands
enable type20 forwarding
enable type20 forwarding {vlan <vlan name>}
Description
Enables the forwarding of IPX type 20 packets.
Syntax Description
vlan name
Specifies a VLAN name.
Default
Enabled.
Usage Guidelines
Type 20 packets are NetBIOS inside IPX.
Example
The following command enables the forwarding of IPX type 20 packets for VLAN
:
accounting
enable type20 forwarding vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
1214
ExtremeWare Software 7.0.0 Command Reference Guide