Enable Ipmcforwarding - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

enable ipmcforwarding

enable ipmcforwarding {vlan <vlan name>}
Description
Enables IP multicast forwarding on an IP interface.
Syntax Description
vlan name Specifies a VLAN name.
Default
Disabled.
Usage Guidelines
If no options are specified, all configured IP interfaces are affected. When new IP interfaces are added,
IPMC forwarding is disabled by default.
IP forwarding must be enabled before enabling IPMC forwarding, and IPMC forwarding must be
disabled before disabling IP forwarding.
Example
The following command enables IPMC forwarding on the VLAN accounting:
enable ipmcforwarding vlan accounting
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1170 ExtremeWare Software 7.0.0 Command Reference Guide