Show Isis Lsdb - Extreme Networks ExtremeWare Command Reference Manual

show isis lsdb

show isis lsdb {level-2 | area <isis area identifier>} {system-identifier
<system identifier> | sysName <alphanumeric string>} {type [non-pseudonode
| pseudonode {circuit-identifier <number(1-255)>}]} {lsp-number
<number(0-255)>}
Description
Displays the contents of the LSDB of the level 2 subdomain or a level 1 area.
Syntax Description
level-2
isis area identifier
system identifier
alphanumeric string
type
number(1-255)
number(0-255)
Default
N/A.
Usage Guidelines
None.
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the level 2 subdomain.
Specifies a level 1 area identifier.
Specifies a system identifier. The format is xxxx.xxxx.xxxx, where x is a
hexadecimal digit.
Specifies the system name of the switch.
Specifies LSDB type, non-pseudonode or pseudonode.
Specifies a circuit ID from 1 to 255.
Specifies an LSP number from 0 to 255.
show isis lsdb
1015