Config Aps Manual - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

config aps manual

config aps <group#> manual [off | working | protection]
Description
Manually determines whether an APS group uses its working line or its protection line as the active
line.
Syntax Description
group#
off
working
protection
Default
The default is
Usage Guidelines
You specify the
APS group that the command applies to. When
that the APS group uses the working line as the active line. Conversely, when
specified, the command requests that the APS group uses the protection line as the active line. One
potential use of the
condition has cleared without waiting for the full wait-to-restore period to elapse. A manual switch is a
lower priority request than a forced switch. events that can override a manual switch include: (1) a
manual off
command, or (4) a signal-fail or signal degrade line condition. This command is only applicable to
SONET ports performing the protection line function. Additionally, the effects of this command are not
preserved across a switch reboot.
Example
The following command example configures APS group
config aps 1001 manual working
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the APS group# to which the command applies.
Specifies that manual switching is disabled, and can be overridden.
Specifies that the APS group uses the working line as the active line.
Specifies that the APS group uses the protection line as the active line.
.
manual off
parameter, which is an integer in the range [1-65535]. The
group#
manual working
command, (2) a
force working
manual working
command is to switch back to the working line after an error
or a force protection command, (3) a
1001
group#
is specified, the command requests
manual protection
lockout on
to use its working line as the active line:
config aps manual
identifies the
is
1261

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.0.0

Table of Contents